Licensed & Insured, in Concord and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Concord
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (980) 304-7168 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Concord and surrounding areas · On-site visits included · Free estimate within 24h
Concord Metal Roofing is a team of local certified professionals based in Concord. We respond quickly in Concord and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (980) 304-7168⭐⭐⭐⭐⭐ 4.9/5 · 347 verified Google reviews
“Needed the roof done on our hay barn before the fall rains and they knocked it out in two days with a crew of four. Straight panels, tight fasteners, and they hauled off every last scrap of the old tin. Our equipment stays dry now, which is all I cared about.”
Commercial & Agricultural Metal Roofing
“We had a covered terrace put in off the back of the house and wanted a real copper roof over it, not the fake stuff. The crew hand-formed the flashing around the posts and the seams look like jewelry. It cost more than I expected, but honestly I can't stop looking at it from the yard.”
Copper & Specialty Metal Roofing
“Our old barn roof was rusted through in a dozen spots and I figured we'd have to tear the whole thing off. They went right over it with ribbed panels instead, saved us a ton of money, and the pasture side looks brand new. Even patched the flashing where the lean-to meets the main barn.”
Corrugated & Ribbed Panel Roofing
“Standing seam on a 2,400 square foot ranch house, and the lines are dead straight from the street. What sold me was them walking me through the snow guard layout before ordering anything. Three days start to finish and the gutters were spotless when they left.”
Standing Seam Metal Roofing
“They rerouted a vent pipe and resealed the boot on our metal roof after the last storm. Quick, fair price, no upsell pitch. Only reason it's not five stars is they came a day later than scheduled, but they called ahead so I can't complain much.”
Metal Roof Repair
“Tore off twenty-plus year old shingles and put down new metal on our place outside Locust. The dumpster was gone the same afternoon they finished and my flower beds were untouched, which I did not expect. House is noticeably quieter in the rain too.”
Metal Roof Replacement
“Had a leak over the kitchen that two other outfits couldn't find. These guys got up there, traced it to failed screws around the chimney flashing, replaced the fasteners and resealed everything. Two hard rains since and not a drop. Wish I'd called them first.”
Metal Roof Leak Repair
“New stone-coated steel roof on our house and it looks like the tile roofs in the neighborhood but won't crack like them. Crew of three, done in four days, and they swept the driveway with a magnet for nails twice. My wife is thrilled, and so is my ladder, which I no longer have to climb.”
Metal Roof InstallationReal photos of our work in Concord · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel install | Starting at $8/sq ft | Includes synthetic underlayment and trim; moves up with pitch and tear-off. |
| Standing seam installation | Starting at $14/sq ft | Concealed fasteners and mechanical seams; price rises with valleys and chimneys. |
| Stone-coated steel or metal shingle | Starting at $12/sq ft | Textured panels with full flashing; HOA approval and complex hips add cost. |
| Retrofit over existing shingles | On estimate | Code limits existing layers, so we inspect the deck before quoting. |
| Travel | Included | In Concord and surrounding Cabarrus County towns, no separate mileage fee. |
| Estimate | Free | Response within 24 hours at (980) 304-7168, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation (standard gable) | Starting at $10/sq ft | Includes tear-off, underlayment, panels and basic flashing; pitch and deck condition move the price. |
| Standing seam on complex roof | Starting at $14/sq ft | Hips, valleys, dormers and chimney transitions add labor and custom flashing work. |
| Mechanically seamed premium system | On estimate | Panel gauge, finish warranty and seaming method drive the final per-square-foot number. |
| Deck repair and sheathing replacement | On estimate | Soft sheathing around chimneys and valleys is common on older Concord homes and priced per sheet. |
| Travel | Included | in Concord and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (980) 304-7168, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and replacement | Starting at $9/sq ft | Includes tear-off, haul-away, decking inspection, underlayment, flashing, and new metal panels. |
| Standing seam upgrade | Starting at $12/sq ft | Concealed fasteners, premium finish, and longer lifespan; price moves with panel width and color. |
| Metal shingle or stone-coated steel | Starting at $11/sq ft | Traditional look for historic or HOA homes; includes trim and flashing details. |
| Retrofit over existing shingles | Starting at $8/sq ft | No tear-off where code allows; saves on disposal but limits underlayment inspection. |
| Complex or large-scale job | On estimate | Steep pitches, multiple chimneys, or large square footage need an on-site look before pricing. |
| Travel | Included | In Concord and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (980) 304-7168, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal roof over shingles (retrofit), single layer | Starting at $7/sq ft | Includes deck inspection, slip sheet, panels and standard flashing over one sound shingle layer. |
| Retrofit with flashing rebuild | Starting at $9/sq ft | Adds chimney, skylight and valley flashing rebuild when the existing flashing is at end of life. |
| Partial tear-off plus retrofit | On estimate | Needed when we find two shingle layers or soft decking that must be stripped and repaired first. |
| Complex or historic roof | On estimate | Dormers, multiple valleys and historic district profiles need an on-site look before pricing. |
| Travel | Included | In Concord and surrounding Cabarrus County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (980) 304-7168, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (screws, sealant, pipe boot) | Starting at $450 | Includes inspection, water test and resealing of small leaks or failed fasteners. |
| Panel replacement | Starting at $850 | Matching panel, labor and seam resealing; steep pitch or high access moves the price up. |
| Flashing rebuild (chimney or skylight) | Starting at $1,200 | New step and counter flashing with proper sealant; masonry condition affects the final number. |
| Large or multi-area repair | On estimate | Widespread storm damage or multiple leaks need an on-site look before quoting. |
| Travel | Included | In Concord and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (980) 304-7168, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak diagnosis and repair | Starting at $450 | Covers inspection, water test and one entry point fix, with access and pitch driving the final number. |
| Screw replacement and re-fastening | Starting at $650 | Pulls and replaces backed-out fasteners with new washers, priced by roof size and screw count. |
| Chimney or skylight flashing rebuild | Starting at $850 | Removes old flashing, cuts new metal and re-sets it, with brick condition and height affecting cost. |
| Storm damage and emergency tarping | Starting at $350 | Emergency tarp and temporary seal after a storm, credited toward the permanent repair. |
| Large or multi-point leak repair | On estimate | Needs an on-site look when several panels, seams and flashings are involved at once. |
| Travel | Included | in Concord and surrounding Cabarrus County areas, with no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot screw replacement | Starting at $750 | Includes inspection, marking and replacement of failed screws and washers on a small roof section. |
| Oversized fastener retrofit | Starting at $1,100 | Includes oversized screws with UV-resistant washers for wallowed holes, priced by fastener count. |
| Full-slope re-screw | Starting at $1,850 | Includes replacement of every fastener and washer on one slope, plus sealant refresh at details. |
| Whole-roof re-fasten | On estimate | Larger roofs and steep pitches need an on-site look to price fastener count and access. |
| Travel | Included | In Concord and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (980) 304-7168, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (shed, carport, small outbuilding) | Starting at $5.50/sq ft | Includes panels, gasketed screws, closures and trim; steeper slopes or tear-off push the rate up. |
| R-panel roof (shop, garage, low-slope building) | Starting at $6.25/sq ft | Trapezoidal rib profile with tighter screw pattern for wind; rotten purlins or decking add cost. |
| 5V panel roof (farmhouse, barn, outbuilding) | Starting at $6.50/sq ft | Classic five-rib look with full ridge and eave trim; barn height and access drive the final number. |
| Retrofit over existing purlins | Starting at $6.00/sq ft | New panels screwed to open framing with no decking; structural repairs found on inspection are extra. |
| Complex or large-scale agricultural job | On estimate | Large barns and multi-building farms need an on-site look at framing, access and panel lengths before quoting. |
| Free estimate | Free | On-site measurement and written quote within 24 hours at (980) 304-7168, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, architectural profile | Starting at $9/sq ft | Includes tear-off of one layer, underlayment, shingles and standard flashing; pitch and roof complexity raise the rate. |
| Slate or shake profile metal shingles | Starting at $11/sq ft | Premium textured profiles cost more in material; dormers, valleys and steep pitches add labor. |
| Retrofit over one layer of shingles | Starting at $7/sq ft | Saves on tear-off and disposal where code allows; deck condition and flashing determine final scope. |
| Deck repair and sheathing replacement | On estimate | Rot around chimneys and valleys is common on older Concord homes and needs an on-site look. |
| Travel | Included | In Concord and surrounding Cabarrus County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (980) 304-7168, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, full tear-off and install | Starting at $9/sq ft | Includes tear-off, new underlayment and panels; pitch, complexity and deck repair move the price up |
| Stone-coated steel retrofit over shingles | Starting at $7/sq ft | Installed over one sound shingle layer where code allows; existing layers and deck condition affect the rate |
| Panel repair and re-flashing | Starting at $450 | Covers damaged panel replacement and flashing renewal; number of penetrations and roof access drive the total |
| Complex or large-scale job | On estimate | Steep pitches, multiple chimneys and historic profiles need an on-site look before we quote |
| Travel | Included | In Concord and surrounding Cabarrus County areas, with no separate call-out or mileage fee |
| Estimate | Free | Response within 24 hours at (980) 304-7168, with no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch or bay window roof | Starting at $20/sq ft | Includes custom-broken copper panels, soldered seams and trim; small square footage keeps the total modest. |
| Zinc accent panels and flashing | Starting at $22/sq ft | Includes zinc panels, dormer or bay flashing and trim; material cost and detailing drive the rate. |
| Full standing seam copper roof | Starting at $28/sq ft | Includes fabrication, underlayment, soldered valleys and custom flashing; roof size and pitch move the number. |
| Custom gutter and flashing work | On estimate | Needs an on-site look because runs, hanger spacing and tie-ins vary house to house. |
| Travel | Included | In Concord and surrounding Cabarrus County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (980) 304-7168, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating, single-story roof | Starting at $2.50/sq ft | Includes cleaning, biological treatment, spot priming and one reflective topcoat on accessible panels. |
| Rust treatment and primer plus topcoat | Starting at $3.25/sq ft | Adds rust neutralizer and rust-inhibitive primer at fasteners and cut edges before topcoat. |
| Two-story or steep-pitch roof | Starting at $4.00/sq ft | Higher labor and safety rigging for steep pitch, height, and tight lot lines. |
| Historic or HOA color-matched refinish | On estimate | Custom color match and design review documentation require an on-site look first. |
| Travel | Included | In Concord and surrounding Cabarrus County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (980) 304-7168, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Skylight re-flashing | Starting at $600 | Covers one skylight curb re-flash with new pan and sealant, priced by roof pitch and material. |
| Chimney flashing rebuild | Starting at $950 | Step and counter-flashing cut into masonry, priced up by chimney height and decking condition. |
| Valley or step flashing replacement | Starting at $800 | Opens the valley or wall, replaces metal and underlayment, priced by linear feet opened. |
| Complex or large-scale job | On estimate | Multiple leak points, rotted decking or full chimney rebuild need an on-site look first. |
| Travel | Included | In Concord and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (980) 304-7168, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single eave run, standard pitch | Starting at $1,200 | One row of seam clamps or pad guards on a typical single-story eave, sealed and aligned |
| Multi-row layout on steep roof | Starting at $2,400 | Two or more rows on a steep standing seam roof over walkways, patios or entries |
| Whole-roof guard system | On estimate | Full perimeter layout with mixed panel profiles and valley work needs an on-site measure |
| Retrofit on existing metal roof | On estimate | Guard addition to a roof in service, includes fastener sealing and seam condition check |
| Travel | Included | In Concord and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (980) 304-7168, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing and fastener walk with dated photos and a written repair-versus-replace assessment. |
| Minor repair (screws, sealant, flashing) | Starting at $275 | Covers backed-out screw replacement, seam re-seal and small flashing fixes; access and roof pitch move the price. |
| Panel section replacement | Starting at $650 | Cut out and replace a damaged panel run with matching profile and color; limb size and panel count drive cost. |
| Partial re-roof after major damage | On estimate | Widespread hail or wind damage across a slope needs an on-site look before we quote the scope. |
| Travel | Included | In Concord and surrounding Cabarrus County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (980) 304-7168, written scope, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard residential inspection | Free estimate | Full walk inspection with photo report, priced by roof size, pitch, and number of penetrations. |
| Insurance claim documentation | Starting at $250 | Detailed photo report and condition rating formatted for adjuster review, priced by roof complexity. |
| Pre-sale or real estate inspection | Starting at $300 | Written condition report with remaining service life estimate, delivered within 48 hours of the visit. |
| Complex or steep roof inspection | On estimate | Pitched, multi-level, or fragile roofs may need drone imagery and an on-site look before quoting. |
| Travel | Included | in Concord and surrounding Cabarrus County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (980) 304-7168, no obligation to book the inspection. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| 6-inch seamless K-style gutter | Starting at $9/linear ft | Includes site-fabricated seamless run with hidden hangers; height and pitch move the price. |
| Half-round seamless gutter | Starting at $14/linear ft | Classic profile for historic and copper roofs; material choice drives the per-foot rate. |
| Leaf guard or debris screen | Starting at $6/linear ft | Micro-mesh or screen fitted to the profile; heavy oak and pine canopy raises the spec. |
| Downspout and extension | Starting at $12/linear ft | Includes downspout, elbows and splash block; buried drainage runs quoted separately. |
| Complex or large-scale job | On estimate | Barns, commercial planes and multi-story lake homes need an on-site look before pricing. |
| Travel | Included | In Concord and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal roof repair (commercial or ag) | Free estimate | Covers leak diagnosis, fastener check, and flashing inspection before any repair price is given |
| Exposed-fastener panel replacement | Starting at $4.50 per sq ft | Includes panel removal, new underlayment, and screw-down panels with closure strips |
| Standing seam installation | Starting at $7.50 per sq ft | Concealed fasteners, raised seams, and full flashing package for wind-rated performance |
| Insulated panel system | On estimate | Foam-core panels need on-site measurement and thermal spec before pricing |
| Retrofit over existing roof | On estimate | Deck condition and code limits on existing layers must be verified on site |
| Estimate | Free | Response within 24 hours at (980) 304-7168, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Concord need a crew that understands this specific patch of the North Carolina Piedmont: steep pitches on Victorian and Craftsman homes near downtown, low-slope brick ranches from the 1950s and 1960s, and a large stock of 15 to 30 year old screw-down roofs whose fasteners are backing out. Concord Metal Roofing is the local answer for metal roof installation, replacement, re-roof, and repair, working through a network of licensed, insured local contractors who know how red clay, heavy tree canopy, and violent afternoon thunderstorms treat a roof.
From Concord and Kannapolis to Harrisburg, Midland, and Mount Pleasant, we match the system to the house instead of the other way around. That means honest guidance on repair versus replacement, standing seam versus exposed fastener, and retrofit versus tear-off. If you want a straight read on your roof, reach out for a free estimate and we will tell you what the roof actually needs.
Most metal roof leaks in Concord start at a fastener. On 15 to 30 year old exposed-fastener roofs, the EPDM sealing washer under each screw dries, shrinks, and cracks, and once that washer fails the screw is a direct path for water. The second most common cause is seam separation from thermal movement: panels expand and contract daily in Piedmont heat, and fasteners or seams that were never designed for that cycle work loose. Failed pipe boots and flashing at chimneys, skylights, and valleys let water in at the transitions, wind-lifted panels open the laps after a straight-line storm, and fallen willow oak or loblolly pine limbs puncture panels outright.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so the stain on your ceiling is rarely where the roof is failing. By the time it shows, sheathing is often rotted and insulation is saturated, which turns a focused repair into a decking replacement. Our metal roof leak repair starts with finding the actual entry point, not guessing at it.
The honest call matters here. If the panels are sound and the leak is at fasteners or flashing, a full screw replacement with new sealing washers often restores a watertight roof for a fraction of replacement cost. If the panels are perforated, seam-separated beyond repair, or the deck is soft, we will say so plainly. Call (980) 304-7168 to talk through what you are seeing, or request metal roof repair and we will give you the repair-versus-replace answer in writing.
We install the full range of systems because no single one fits every Concord roof. Standing Seam Metal Roofing is the premium choice: concealed clips, no exposed screws, and a Kynar 500 / PVDF finish that holds color through Piedmont sun. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. Metal Shingle Roofing and Stone-Coated Steel Roofing suit historic downtown homes and HOA subdivisions where profile matters, and Copper & Specialty Metal Roofing handles accents, porches, and bay roofs.
The honest comparison: standing seam costs more up front and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. Metal Roof Over Shingles (Retrofit) is a legitimate option when the deck is sound, and tear-off is the right call when it is not.
Metal roof installation in Concord is typically quoted per square foot, while repairs are often flat-rate once we know what we are dealing with. Price depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access around landscaping or steep drops. We frame every figure as a typical range, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your carrier.
For a realistic starting point, see our pricing page, then request a free estimate or free roof inspection so we can price your actual roof instead of a ballpark. We will tell you when the cheaper option is the right one.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with the carrier, and we make no promise that a claim will be approved. We document what we see; you and your insurer decide what happens next.
On permits: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements, fees, and inspection thresholds vary by city and county, and recover over existing shingles is limited by code to a set number of existing layers. Historic district or HOA design review can also restrict panel profile and color choices. Requirements vary, so always verify with the Concord building or planning department before starting your project. If you have questions about how this applies to your roof, contact us and we will point you to the right office.
Ready to get started? Concord Metal Roofing serves in Concord and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Concord · Response within 24h · No commitment · ☎ (980) 304-7168
Your Free Quote Request