Serving the Concord area  ·  (980) 304-7168  ·  Open Mon-Sun 7am-7pm
📞 (980) 304-7168 Free Quote

Metal Roofing in Huntersville, NC (28078) · Local Professionals

Concord Metal Roofing · Fast response in Huntersville and the Concord area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+347Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Huntersville is full of big brick and vinyl subdivisions off Poplar Tent Road and Cox Mill, and most of those architectural shingle roofs are now 20 to 30 years old and baking under the Piedmont sun.

We are Concord Metal Roofing, and we work Huntersville (28078) from Lake Norman homes near Birkdale to the horse farms out toward Highway 73. When your shingles start curling, granulating, or leaking at the chimney, we give you a straight answer about metal, not a sales pitch.

Metal Roofing in Huntersville (28078)

Huntersville sits on the rolling red clay of the North Carolina Piedmont, and that clay matters. Water runs off it slowly, so roof drainage and gutter sizing need to be right the first time. The big 1990s and 2000s subdivisions off Poplar Tent, Cox Mill, and Afton Village have architectural shingle roofs that are hitting the end of their life all at once. Add the afternoon thunderstorms, straight-line wind, and occasional hail, and you get lifted shingles, granule loss, and leaks at the flashing. Lake Norman homes toward Cornelius and Davidson deal with tree limbs and humidity, while the older farmhouses and barns out on the rolling countryside often need standing seam or stone-coated steel to shed debris and heat. We know the difference between a tight subdivision lot and a long gravel driveway, and we plan access and staging accordingly.

Our team has been working Huntersville and the Concord area long enough to know which neighborhoods have HOA design review, which streets are tough for a dumpster, and which roof pitches are common here. We install standing seam, metal shingle, stone-coated steel, corrugated panels, and more, and we repair what other crews walk away from.

Our services in Huntersville

How a Job Works in Huntersville

Step 1: You call (980) 304-7168 or request a free estimate online. We schedule a time to walk the roof and the attic, check the flashing, fasteners, and decking, and talk through metal options that fit your house and your budget. You get a written scope and price before any work starts.

Step 2: Once you approve, we pull the roofing permit with the Town of Huntersville and coordinate any HOA design review if your neighborhood requires it. On install day we protect landscaping, stage materials where the truck can actually fit, and tear off or retrofit according to the plan. For tight lots in Afton Village or Cox Mill, we plan panel delivery and dumpster placement ahead of time so we are not blocking the street or a neighbor's driveway.

Step 3: We clean the site daily, magnet-sweep for nails, and do a final walkthrough with you. We haul off all old material and leave your property clean. You get a clear explanation of the finished roof, maintenance, and warranty paperwork.

Pricing in Huntersville depends on roof size, pitch, access, decking condition, and how much flashing and trim work is involved. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Stone-coated steel and metal shingle both start at $9 per square foot, corrugated and ribbed panels at $5.50, and copper or specialty metal at $20. Repairs start at $450, leak repairs at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting starts at $2.50 per square foot, gutters for metal roofs at $9 per linear foot, and snow guards at $1,200. Storm and wind damage inspections are free. Call (980) 304-7168 for a free estimate specific to your Huntersville home.

My shingle roof in Cox Mill is about 25 years old and losing granules. Is metal replacement worth it here?
In Huntersville, yes, especially on the large subdivision roofs built in the 1990s and 2000s. The Piedmont sun and summer storms wear shingles out faster than many homeowners expect. Metal reflects heat, sheds debris, and lasts decades longer than architectural shingles, so the higher upfront cost usually pays back in avoided replacements and lower cooling bills.
A storm just lifted panels on my roof near Lake Norman. How fast can you respond?
We treat wind-lifted panels and active leaks as priority calls. Call (980) 304-7168 and we will schedule an inspection as quickly as possible, document the damage for your insurance claim, and make temporary repairs if needed before permanent work. We never promise coverage or deductible help, but we do provide thorough documentation.
What does a typical metal roof replacement cost in Huntersville?
Most Huntersville homes fall in a range based on square footage and roof complexity. Replacement starts at $9 per square foot, standing seam at $10, and stone-coated steel at $9. A simple ranch is different from a steep, cut-up roof in Afton Village. We give you a written price after a free on-site assessment, so there are no surprises.
Do I need a permit for a metal roof in Huntersville, and does the Town require inspections?
Yes, a full replacement or re-roof typically requires a roofing permit from the Town of Huntersville, and inspection requirements vary. We pull the permit and coordinate inspections as part of the job. If your home is in a historic district or HOA, design review may also apply, and we help you navigate that before ordering materials.
My HOA in Birkdale has design rules. Can you help with approval for a metal roof?
Yes. Many Huntersville subdivisions have architectural review requirements that restrict panel profile and color. We provide product specifications, color samples, and installation details your HOA needs, and we coordinate with the review board so approval does not hold up the job. We also respect property line setbacks and neighbor concerns during staging and installation.
Are you fully insured for work at my Huntersville property?
Yes. Concord Metal Roofing carries general liability insurance and workers' compensation coverage. We are happy to provide proof of insurance before work begins, so you are protected if anything happens on your property.
What maintenance does a metal roof need in Huntersville's climate?
Check fasteners and flashing once a year, especially after storm season, and keep gutters clear of pine needles and oak leaves. Ice dams are rare here but can happen at the eaves on shaded roofs, so proper underlayment and ventilation matter. We offer inspections and coating services to extend the life of your roof.
Why choose us?

Trusted professionals in Concord

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Concord

All your work handled by qualified professionals in Concord

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

347+ Verified Client Reviews in Concord

⭐⭐⭐⭐⭐ 4.9/5 · 347 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Concord · Response within 24h · No commitment · ☎ (980) 304-7168

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Concord ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm