Serving the Concord area  ·  (980) 304-7168  ·  Open Mon-Sun 7am-7pm
📞 (980) 304-7168 Free Quote

Metal Roofing in Landis, NC (28088) · Local Professionals

Concord Metal Roofing · Fast response in Landis and the Concord area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+347Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Landis is a small town where the cotton mill history still shows in the modest cottages and bungalows tucked off Central Avenue and along the old railroad corridor. Most of these homes were built between the 1920s and 1960s, with low-pitched roofs that have taken decades of Piedmont sun, summer hail, and winter ice. If your roof is original or on its second layer of shingles, it is probably due for a real conversation about metal.

Homeowners in Landis (28088) call Concord Metal Roofing because we know these older mill-village roofs and the brick ranches on the edge of town. We are based just up the road in Concord, so we can be on your property quickly, and we understand the specific ways metal roofing works on small lots with mature trees and tight access.

Metal Roofing in Landis (28088)

Landis sits on the rolling red-clay hills of Cabarrus County, and that clay matters. It holds water after heavy rain, so roof runoff and gutter discharge need to be managed carefully, especially on the older cottages with shallow eaves. The housing stock here is a mix: small gabled mill homes with steep pitches, 1950s brick ranches with low-slope shingle roofs, and a few larger farmhouses on the outskirts. Many properties have mature willow oaks and loblolly pines close to the house, which means fallen limbs and pine straw buildup are common, and access for staging materials can be tight. We plan each job around those constraints, whether that means hand-carrying panels or using a smaller lift.

Our team has worked on roofs across Landis and the surrounding Concord area for years. We have replaced shingle roofs with standing seam on mill cottages, coated older metal barn roofs on the farm edges, and repaired leaky fasteners on low-slope porch roofs. We know what the local building department expects for permits, and we know how to work with historic district or HOA design rules when they apply.

Our services in Landis

How a Job Works in Landis

Step 1: Call us at (980) 304-7168 or request a free estimate online. We will schedule a time to walk your roof and property, check the decking, flashing, and attic ventilation, and talk through options. You get a written scope and price before any work starts.

Step 2: Once you approve, we pull the required permits with the local building department and order materials. On tight lots off Central Avenue or near the mill neighborhoods, we coordinate delivery and staging so we do not block your driveway or your neighbor's. If your home is in a historic district or under HOA review, we help prepare the submittal so panel profile and color meet the rules.

Step 3: After installation, we clean the site thoroughly, including magnet sweeps for screws and nails. We walk the finished roof with you, show you the work, and leave you with care information. We do not leave a mess behind.

Pricing in Landis depends on the size and pitch of your roof, the condition of the decking, and how accessible the property is. For common jobs here, metal roof replacement starts around $9 per square foot, metal roof over shingles (retrofit) starts around $7 per square foot, and standing seam starts around $10 per square foot. Metal roof coating and painting starts around $2.50 per square foot, which is often a good option for older metal roofs on barns or porch roofs that are still structurally sound. Repairs and leak fixes start around $450, and screw replacement or re-fastening starts around $750. Call (980) 304-7168 for a free estimate on your specific roof.

My Landis mill cottage has a steep, small gabled roof with pine trees hanging over it. Is metal a good fit?
Yes, and it is a common job for us here. The steep pitch actually helps metal shed pine straw and debris, and we can install snow guards or a heavier gauge panel if limbs are a concern. We will check the decking and flashing carefully because older cottages often have uneven rafters and original board sheathing.
A storm just peeled back panels on my roof in Landis. How fast can you get out?
We offer free storm and wind damage inspections and prioritize active leaks and lifted panels. Call (980) 304-7168 and we will schedule an inspection, usually within a day or two depending on demand. We can tarp or secure the roof temporarily if rain is coming.
What does a typical metal roof replacement cost for a 1,200 square foot ranch in Landis?
For a simple low-slope ranch, replacement often falls in the range of $9 to $12 per square foot installed, so a 1,200 square foot roof might run roughly $10,800 to $14,400 depending on decking repairs, access, and panel choice. Retrofit over existing shingles can be less. We give a firm written price after inspecting.
Do I need a permit to replace my roof in Landis, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in Landis and Cabarrus County, and rules vary by jurisdiction. We pull the permit for you and coordinate inspections with the local building department. If your home is in a historic district, design review may also apply, and we help with that submittal.
My neighbor's tree drops limbs on my roof, and my HOA has rules about roof color. Can you help with approval?
We can provide panel samples and specification sheets for your HOA submittal, and we are familiar with common architectural review requirements in the area. For property line issues, we recommend confirming your boundary and easements before work begins, and we will position staging and drainage so runoff does not cross onto a neighbor's lot.
Are you fully insured for work on my Landis property?
Yes. We carry general liability insurance and workers' compensation coverage for our crew.
What maintenance does a metal roof need in Landis with our hot summers and occasional ice?
Plan on an annual inspection, ideally in spring and fall. Check fasteners and sealant at flashing and penetrations, clear pine straw and leaves from valleys and gutters, and look for loose panels after major storms. Ice dams are less common here than up north, but we do see ice at eaves on shaded roofs, so keep gutters clear before winter.
Why choose us?

Trusted professionals in Concord

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Concord

All your work handled by qualified professionals in Concord

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

347+ Verified Client Reviews in Concord

⭐⭐⭐⭐⭐ 4.9/5 · 347 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Concord · Response within 24h · No commitment · ☎ (980) 304-7168

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Concord ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm