Serving the Concord area  ·  (980) 304-7168  ·  Open Mon-Sun 7am-7pm
📞 (980) 304-7168 Free Quote

Metal Roofing in Mount Pleasant, NC (28124) · Local Professionals

Concord Metal Roofing · Fast response in Mount Pleasant and the Concord area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+347Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Mount Pleasant, NC 28124 is a small town where the old and the new sit side by side. You have farmhouses with tin roofs that have seen decades of Piedmont weather, and newer homes with shingle roofs that are starting to show their age. The rolling hills and red clay soil are just part of the landscape here, and so are the afternoon thunderstorms that roll through in the summer.

Homeowners in Mount Pleasant call Concord Metal Roofing because we understand the local conditions. We know that the historic homes near the old downtown need careful attention, and that the newer subdivisions off Highway 73 have their own set of challenges. Whether it's a leaky barn roof or a full replacement on a family home, we're just a short drive away and ready to help.

Metal Roofing in Mount Pleasant (28124)

Mount Pleasant sits in Cabarrus County, just northeast of Concord, and the terrain here is classic North Carolina Piedmont: rolling hills, stiff red clay, and a mix of mature hardwoods and pines. The housing stock reflects the town's history. You'll find older farmhouses with original metal roofs that need repair or replacement, mid-century brick ranches with low-pitched shingle roofs that are prone to leaks, and newer construction in subdivisions like The Village at Mount Pleasant or along Walker Road. The red clay can cause drainage issues, and the summer storms bring wind and hail that test any roof. We've worked on everything from historic homes near the Mount Pleasant Collegiate Institute to modern houses with complex rooflines.

Our team has been serving Mount Pleasant and the surrounding Concord area for years. We know the local building department, the permit requirements, and the quirks of the weather here. When we install a metal roof, we use fasteners and materials that are designed to handle the heat, humidity, and storms that are common in this part of North Carolina.

Our services in Mount Pleasant

How a Job Works in Mount Pleasant

Step 1: It starts with a phone call or a message. We'll schedule a free on-site assessment at your convenience. We'll inspect your current roof, take measurements, and discuss your options. You'll get a written estimate that covers materials, labor, and any permits needed.

Step 2: Once you approve the estimate, we'll pull the necessary permits from the Cabarrus County building department (or the City of Concord if you're in that jurisdiction). We'll order materials and schedule the work. For homes in tighter neighborhoods or with steep driveways, we'll plan the delivery and staging carefully to minimize disruption. If you live in a historic district or HOA, we'll help you get the required approvals.

Step 3: After the installation, we do a thorough cleanup. We'll walk the property with you to make sure you're satisfied. We haul away all old materials and leave your yard as clean as we found it. We also provide a final inspection and warranty documentation.

Pricing for metal roofing in Mount Pleasant depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you're considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs start at $450, and leak repairs also start at $450. For a typical 1,500 square foot ranch, a basic corrugated panel roof might run around $8,000 to $12,000, while a standing seam roof could be $15,000 to $25,000. We always provide a free estimate so you know exactly what to expect. Call us at (980) 304-7168 to schedule yours.

My farmhouse near the Mount Pleasant Collegiate Institute has an old tin roof that's rusting through. Can you repair it or do I need a full replacement?
It depends on the extent of the rust. If it's isolated spots, we can often repair with metal patches and a protective coating. But if the rust is widespread or the metal is thin, a replacement is usually more cost-effective. We'll inspect it and give you honest options.
We had a bad storm last night and a tree limb punctured our metal roof. How quickly can you respond for emergency repairs in Mount Pleasant?
We prioritize storm damage calls. In most cases, we can be on-site within 24 to 48 hours to tarp the area and prevent further damage. Call us at (980) 304-7168 and we'll schedule a prompt inspection.
What's the typical cost to replace a shingle roof with standing seam metal on a 2,000 square foot house in Mount Pleasant?
For a 2,000 square foot home with a standard roof pitch, standing seam metal roofing typically ranges from $20,000 to $30,000, including materials and labor. Factors like roof complexity, removal of old shingles, and gutter work can affect the final price. We provide a detailed estimate after a free inspection.
Do I need a permit from the town of Mount Pleasant for a metal roof replacement, and how long does it take?
Yes, a permit is generally required for a full replacement. The process involves submitting plans and paying a fee. In Mount Pleasant, permits are handled through Cabarrus County or the City of Concord, depending on your location. We handle the paperwork and typically get approval within a week or two.
My neighbor says my new metal roof's color is too bright and wants me to change it. Does the HOA or town have rules about roof color in Mount Pleasant?
Some HOAs and historic districts have design guidelines that restrict roof colors and materials. We can help you check with your HOA or the town planning department before ordering materials. If there's a dispute, we can provide documentation and suggest colors that meet guidelines.
Are you fully insured for metal roofing work in Mount Pleasant, and what does that cover?
Yes, we carry general liability insurance and workers' compensation coverage. This protects you and your property in case of an accident during the job.
What maintenance does a metal roof need in Mount Pleasant's climate, especially with the summer storms and winter ice?
We recommend an annual inspection, especially after storm season. Check for loose fasteners, debris buildup, and any signs of rust or sealant wear. In winter, ice dams can form at the eaves, so keep gutters clear. We offer maintenance plans and can perform inspections to catch small issues before they become big problems.
Why choose us?

Trusted professionals in Concord

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Concord

All your work handled by qualified professionals in Concord

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

347+ Verified Client Reviews in Concord

⭐⭐⭐⭐⭐ 4.9/5 · 347 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Concord · Response within 24h · No commitment · ☎ (980) 304-7168

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Concord ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm